|
An example of Plus-3 sizing-going from this Mach 1's stock-size 14-inch stuff to 17x8 American Racing Torq-Thrust IIs in a custom offset. Showing how important it is to get overall height right, P225/55R17 rubber was first tried on this project, but proved too tall (by about 0.9 inches) and rubbed. Going to lower profile P225/50R17 skins solved the problem by being almost exactly the same height as the Kelly 14s. Notice, though, that any excess ride height becomes more obvious with the short sidewalls of the 17-inch rolling stock. (Time to drop that Mach into the weeds!-Ed.) View Related Article
|
|