|
|
 Lokar makes cable installation...  Lokar makes cable installation easy. We like this cable union with four Allen-set screws for exceptional security. Noel installs both cables and tightens the Allen screws, using Loctite thread locker.  Cable routing should always...  Cable routing should always be with a minimum of bends-smooth bends that allow smooth operation with no sharp turns. Again, follow Ford's lead, keeping cable routing as close to factory as possible.  We're using Ford's cable anchor...  We're using Ford's cable anchor points, which are like this for '66. For '65, the cables are routed between the floorpan and framerail. For '67-'73, the cables are routed through cable anchor points along the framerails.  Because our '66 fastback is...  Because our '66 fastback is an "in process" car project, there's no carpeting. We suggest complete hand-brake installation before carpeting is installed for this reason: Escutcheon holes should be drilled in the floorpan before the carpet goes down. Try drilling through carpeting and you'll understand our suggestion. The boot goes on first as shown.  Using the escutcheon as a...  Using the escutcheon as a template, mark the holes, and drill 1/8-inch screw holes. Finish the installation by placing the carpet back in place and securing the parking brake's boot and escutcheon.
|