Modified Mustangs & Fords Homepage

Budget 390 FE Engine Build Top And Secondary Ring Installation

Prev Next
Top and secondary rings are installed using an expander tool. Never roll these rings on, which will distort the ring. Gaps should be 180 degrees opposite and 45 degrees from each oil ring gap. All ring gaps should be 9, 12, 3, and 6 o'clock. And yes, rings will move during operation.
Budget FE Power! - Part 1 in a Two-Part Series

 Top and secondary rings are installed using an expander tool. Never roll these rings on, which will distort the ring. Gaps should be 180 degrees opposite and 45 degrees from each oil ring gap. All ring gaps should be 9, 12, 3, and 6 o'clock. And yes, rings will move during operation.  View Related Article

 

Get Adobe Flash player

Car Research Guide