Modified Mustangs & Fords Homepage

Turbocharged Six Cylinder Mustang Center Section

Prev Next
Randy's 8-inch center with 3.55 gears is installed using a new gasket and hardware. Standard 90W-140 gear lube is used, as well as a friction modifier for limited-slip operation. Always use new copper washers on the center chunk mounting studs for proper sealing.
Inline Is Real Fine - Part 1 In A Three-Part Series

 Randy's 8-inch center with 3.55 gears is installed using a new gasket and hardware. Standard 90W-140 gear lube is used, as well as a friction modifier for limited-slip operation. Always use new copper washers on the center chunk mounting studs for proper sealing.  View Related Article

 

Get Adobe Flash player

Car Research Guide