Edelbrock 351 Cleveland Cylinder Head
|
The question soon arose about what awaits the person who wants to try these Cleveland heads on a Windsor block. This photo shows how the castings are prepared for this possibility. The large cooling passage on the combustion face (shown on the left) will be threaded in the production head, and plugs will be furnished. The small dimple seen on the intake face of the cylinder head denotes the spot where drilling should be done to open up the water passageway for use on the Windsor engine. With the threaded plug in place and the other passageway opened up, the quest for an intake manifold can begin. We've even heard rumblings at Edelbrock that production of a Clevor-type intake might be in the cards for the near future. View Related Article
|
|