Modified Mustangs & Fords Homepage

Rearend Rebuild Replacement Gearset

Rearend Rebuild Replacement Gearset
Ford 8-Inch Rebuild - Geared Up
Here is our replacement gearset. The 3.50 ratio will be perfect for improving our off-the-line performance and low-end grunt for towing ability. With a 25-inch-tall tire, these gears will yield an engine rpm of 2,300 at 70 mph, so our car will still have very reasonable freeway performance. The used ring-and-pinion set cost $150. View Related Article
Rearend Rebuild 1967 Ranchero Rearend Rebuild Remove Four Axle Bolts Rearend Rebuild Disconnect Driveshaft Rearend Rebuild Check Ring And Pinion Mesh Rearend Rebuild Punch Rearend Rebuild Remove Differential Rearend Rebuild Remove Pinion Housing
Rearend Rebuild Differential Bearings Rearend Rebuild Ring Bolts Rearend Rebuild Replacement Gearset Rearend Rebuild Bearings And Races Rearend Rebuild Pinion Housing Rearend Rebuild Pinion Shaft Rearend Rebuild Loctite
Rearend Rebuild Replacement Ring Gear Rearend Rebuild Pinion Gear Pressed Rearend Rebuild Install Differential Bearings Rearend Rebuild Spanner Nuts Rearend Rebuild Position Ring Gear Rearend Rebuild Gear Marking Rearend Rebuild Shim
Rearend Rebuild Locks Rearend Rebuild O Ring Rearend Rebuild Centersection
Ford Mustang Research
Ford Mustang The new Ford Mustang offers solid performance and fuel economy. The V8 standard engine in the Mustang gives you 412 horsepower with an estimated 23 mpg. It can seat 4 people comfortably. Also check out the Mercury Sable and the Ford Shelby GT 500.
Get Adobe Flash player