With the module mounted on the passenger side of the box, and the power and ground wiring headed toward the engine compartment, the remaining wiring, which Painless gives you generous lengths of, is routed toward the driver side of the dash. The first connection we'll come to is for the radio delay circuit. The red wire coming from the convenience module must be connected to the radio's key-switched power. This allows the radio to stay on for up to 15 minutes with the key off, or until the door is opened. We'll be using one of the kit's Posi-Taps for this. The base of the tap is slid over the radio's switched power wire, as shown here.