|
Before reinstalling the cluster, it's time to install the actual LED bulbs. First, we remove the four illumination bulbs (blue/red wiring). Then the green LEDs are installed into the illumination sockets to complete the conversion. You'll notice the bulb is a bit crooked in the socket in this photo. We had two sockets that must have been stretched from thermal cycling or a previous owner's brute handling. A little reshaping with a pair of pliers got the bulbs to sit squarely in their sockets. The three clear LEDs were installed in the left- and right-turn signal sockets and the high-beam indicator. View Related Article
|
|