The panel-based wiring concept preached by the Ron Francis folks means anyone, even Rusty, can wire his/her EFI engine project quickly and easily. The fuse panel and ECM mount wherever you find convenient—even all the way back in the trunk. Ron Francis makes this easy with a neat, compact panel. Then you simply follow the well written directions to connect your EFI engine's components (inputs and outputs) and route their un-terminated wire ends to the panel's location. Ron Francis gives each circuit 20 feet of high-quality automotive grade wiring that is labeled every 10 inches. Simply cut the wire to length, terminate the ends, and secure the wire ends to the panel. What could be easier? Follow along as we look over the installation as Rusty and his son, Brian, wire their very first EFI wiring system in the following photos.