|
|
| Guide To Ford Universal Joints | | Series | Width | Cap Diameter | | 1310 | 3.218" | 1.063" | | 1330 | 3.625" | 1.063" | | 1350 | 3.625" | 1.188" | | Permanently Lubricated Universal Joints | | Series | Part Number | | 1310 Spicer | 5-785X | | 1330 Spicer | 5-791X | | 1350 Spicer | 5-447X | | Greaseable Universal Joints | | Series | Part Number | | 1310 | 5-153X | | 1330 | 5-1203X | | Conversion Universal Joints | | Part Number | Cap to Cap | Inside to Inside | Cap | Cap | | 5-3022X | 3.218" | 1.125" | 1.125" | 1.063" | | 5-788X | 3.218" | 2.125" | 1.075" | 1.063" | | 5-794X | 3.625" | 2.563" | 1.125" | 1.063" | | 5-797X | 3.625" | 2.625" | 1.125" | 1.063" | | Slip-Yokes | | Applications | Part Number | | SY-C4-1310 | | SY-C4-1330 | | SY-C4-1350Q | Ford 1.219 inch, 27 on 28-spline for C4, FMX, Top
Loader three- and four-speed, T5 Light-Duty,
AOD and AODE | | SY-C6-1330 | | SY-C6-1350 | | SY-C6-1350Q | Ford 1.390 inch, 30 on 31-spline for C6, Tremec
T45, big-block Top Loader four-speed | | Pinion Yokes | | Applications | Part Number | | PY-9 | Steel 28-spline for 9-inch | | PY-9P | Steel 35-spline for 9-inch | | PY-8.8 | Steel 30-spline for 8.8-inch | | PY-9-1310-A | Aluminum 28-spline for 9-inch | | PY-9-1350-A | Aluminum 28-spline for 9-inch | | PY-9P-1350-A | Aluminum 35-spline for 9-inch |  Once perfect alignment is...  Once perfect alignment is achieved, each end is welded to the tube in a timed pattern that ensures a perfect union. Heat is concentrated to prevent distortion from heat across the tube. The shaft is again checked for run out at three points to ascertain alignment.  The shaft is spun and dressed...  The shaft is spun and dressed with 180-grit paper to improve its appearance. you can order a polished-aluminum driveshaft from Mustangs Plus or Inland Empire Driveline.  Driveshafts are dynamic balanced...  Driveshafts are dynamic balanced just like your car tires or engine assembly to eliminate vibration. Each weight is tied to the shaft and welded in place, then balance is checked again.
|
|