Modified Mustangs & Fords Homepage

P78635 Image Large

Prev Next
Front attachment points are at the bumper bracket holes in the framerails. Measure 12 inches to the front of the vehicle, plus the distance necessary to cover the holes. Make a template from the holes in the frame, then center punch and drill the angle iron accordingly. Like the rear attachment points, 1- by 1-inch angle iron is used between the Whirly Jig adapter and the frame.
Whirly Jig: A Better Auto-Body Rotisserie

 Front attachment points are at the bumper bracket holes in the framerails. Measure 12 inches to the front of the vehicle, plus the distance necessary to cover the holes. Make a template from the holes in the frame, then center punch and drill the angle iron accordingly. Like the rear attachment points, 1- by 1-inch angle iron is used between the Whirly Jig adapter and the frame.  View Related Article

 

Get Adobe Flash player

Car Research Guide