Modified Mustangs & Fords Homepage

127 0209 Cam05 Z

Prev Next
05. You'll need a 15⁄64-inch drill bit to install the lifter retainer spider into the engine. You'll also need a thread tap to thread the holes. The other special tool was included with the MSD wires and will be used to crimp the completed wire ends.
351W Engine Roller Cam Conversion - Cam Up, Fire Up

 05. You'll need a 15⁄64-inch drill bit to install the lifter retainer spider into the engine. You'll also need a thread tap to thread the holes. The other special tool was included with the MSD wires and will be used to crimp the completed wire ends.  View Related Article

 

Get Adobe Flash player

Car Research Guide