Modified Mustangs & Fords Homepage

Factory Five Roadster

Prev Next
Before building up the taillight pads on the body, Roeder used his die grinder and cutting bit to make a clearance slot for the ground tab on the taillight itself. This will also allow the wiring connector to pass through the opening more easily.
Facotry Five Roadster Build Part 16 - Project Snake Charmer Gets Primered

 Before building up the taillight pads on the body, Roeder used his die grinder and cutting bit to make a clearance slot for the ground tab on the taillight itself. This will also allow the wiring connector to pass through the opening more easily.  View Related Article

 

Get Adobe Flash player