Factory Five Racing Roadster Wiring Mass Flo

Since we decided not to install any sort of aftermarket glovebox or water-based heater in the dash, we used the space behind the dash on the passenger side to mount our Mass-Flo EFI computer, relays, and fuse block. The computer was attached to the dash-support brace with two stainless tapping bolts and a small bracket we fabricated to the lower-dash cross tube. The relays were bolted to the edge of the computer-mounting bracket, and the fuse block was mounted to the side of the dash support. Everything is nice, neat, and accessible.

Factory Five Roadster Wiring Install - Project Snake Charmer Part: 11

Since we decided not to install any sort of aftermarket glovebox or water-based heater in the dash, we used the space behind the dash on the passenger side to mount our Mass-Flo EFI computer, relays, and fuse block. The computer was attached to the dash-support brace with two stainless tapping bolts and a small bracket we fabricated to the lower-dash cross tube. The relays were bolted to the edge of the computer-mounting bracket, and the fuse block was mounted to the side of the dash support. Everything is nice, neat, and accessible. View Related Article