Modified Mustangs & Fords Homepage

Factory Five Roadster Engine And Tranmission Flywheel

Prev Next
Depending upon your engine stand design, you may or may not be able to mount your flywheel at this time. Our Powerbuilt engine stand had a deep enough offset to allow us to do so. We're using a Centerforce billet-steel flywheel (PN 700221, $259.95), which has a 28-ounce balance with a 1011/42-inch late-model-clutch bolt pattern. The Powerbuilt flywheel holder is a great tool to keep the flywheel in place while tightening the mounting bolts. We used ARP fasteners from Dallas Mustang Parts (PN 9370; $9.99).
Factory Five Roadster Build Part 9: Engine And Transmission Install

 Depending upon your engine stand design, you may or may not be able to mount your flywheel at this time. Our Powerbuilt engine stand had a deep enough offset to allow us to do so. We're using a Centerforce billet-steel flywheel (PN 700221, $259.95), which has a 28-ounce balance with a 1011/42-inch late-model-clutch bolt pattern. The Powerbuilt flywheel holder is a great tool to keep the flywheel in place while tightening the mounting bolts. We used ARP fasteners from Dallas Mustang Parts (PN 9370; $9.99).  View Related Article

 

Get Adobe Flash player