Modified Mustangs & Fords Homepage

Factory Five Roadster Fuel System Install Mounting The Fuel Lines

Prev Next
Determining the routing of the pressure and return lines along the frame is a little tricky, especially at the rear where you have to work around moving suspension components. We secured the lines every 10 inches with rubber-coated line clamps and 31/416-inch rivets. Check with your state laws for home-built vehicles, as some define the minimum and maximum spacing for line retention.
Factory Five Roadster Build Part 8 - EFI Fuel System

 Determining the routing of the pressure and return lines along the frame is a little tricky, especially at the rear where you have to work around moving suspension components. We secured the lines every 10 inches with rubber-coated line clamps and 31/416-inch rivets. Check with your state laws for home-built vehicles, as some define the minimum and maximum spacing for line retention.  View Related Article

 

Get Adobe Flash player