Modified Mustangs & Fords Homepage

Factory Five Roadster Fuel System Install Vent Valve

Prev Next
The late-model Mustang fuel tank uses a vent valve to release tank pressure to an emissions canister, which is then usually pulled back into the engine and burned via a canister-purge solenoid and a length of vacuum hose. We will not use the canister purge setup, but we'll still need to vent the gas tank. The seal is PN F6TC-9B076-AA and the vent valve is E7DZ-9B593-A, both of which are available from your nearest Ford dealer.
Factory Five Roadster Build Part 8 - EFI Fuel System

 The late-model Mustang fuel tank uses a vent valve to release tank pressure to an emissions canister, which is then usually pulled back into the engine and burned via a canister-purge solenoid and a length of vacuum hose. We will not use the canister purge setup, but we'll still need to vent the gas tank. The seal is PN F6TC-9B076-AA and the vent valve is E7DZ-9B593-A, both of which are available from your nearest Ford dealer.  View Related Article

 

Get Adobe Flash player