Modified Mustangs & Fords Homepage

Factory Five Roadster Center Cap Spacer

The base of the spinner assembly, along with the nylon slip-clutch, is seated over the FR500 specific spacer last, and a nylock nut is installed. Follow the directions carefully so the tri-bar is tight, but not too tight to turn by hand.
Factory Five Roadster Build Part 7: Project Snake Charmer

The base of the spinner assembly, along with the nylon slip-clutch, is seated over the FR500 specific spacer last, and a nylock nut is installed. Follow the directions carefully so the tri-bar is tight, but not too tight to turn by hand.  View Related Article

 

Get Adobe Flash player