Modified Mustangs & Fords Homepage

Factory Five Roadster Axlehousing

Prev Next
After completing the rear-brake installation on our DTS-built axlehousing, it was time to bring it home and install it in our Roadster project. Since we ordered our kit with the three-link rear suspension, FFR preinstalled the three-link brackets and welded them at the factory for us. While this creates a strong assembly, we misjudged the working room and found we had to either pull the caliper and rotor back off or temporarily remove the lower control arm mounting bracket for the housing to pass through the frame opening.
Factory Five Roadster Build Part 7: Project Snake Charmer

 After completing the rear-brake installation on our DTS-built axlehousing, it was time to bring it home and install it in our Roadster project. Since we ordered our kit with the three-link rear suspension, FFR preinstalled the three-link brackets and welded them at the factory for us. While this creates a strong assembly, we misjudged the working room and found we had to either pull the caliper and rotor back off or temporarily remove the lower control arm mounting bracket for the housing to pass through the frame opening.  View Related Article

 

Get Adobe Flash player