Modified Mustangs & Fords Homepage

Project Snake Charmer Rearend 360 Degree Weld

Prev Next
Pat from DTS carefully welds the joint in a 360-degree fashion, using a custom work stand that allows him to rotate the housing during the welding process. The axle tubes are checked and straightened during the process, and the billet 9-inch ends are welded after the tubes.
Factory Five Roadster Build Part 6 - Rearend Install

 Pat from DTS carefully welds the joint in a 360-degree fashion, using a custom work stand that allows him to rotate the housing during the welding process. The axle tubes are checked and straightened during the process, and the billet 9-inch ends are welded after the tubes.  View Related Article