Modified Mustangs & Fords Homepage

Factory Five Roadster Marking The Preinstalled Aluminum

Prev Next
For the first few nights, we performed our first step in the FFR build manual, which was to mark all of the preinstalled aluminum panels before removing them from the chassis. These panels are installed with just a few tapping screws used strictly for shipping purposes. Some overlap other panels, and it will be difficult to determine their placement without some sort of identification. A Sharpie does the trick and wipes off easily with lacquer thinner during final installation.
Factory Five Roadster Build Part 1: Project Snake Charmer

 For the first few nights, we performed our first step in the FFR build manual, which was to mark all of the preinstalled aluminum panels before removing them from the chassis. These panels are installed with just a few tapping screws used strictly for shipping purposes. Some overlap other panels, and it will be difficult to determine their placement without some sort of identification. A Sharpie does the trick and wipes off easily with lacquer thinner during final installation.  View Related Article

 

Get Adobe Flash player