Each week we'll update our Web visitors on our progress right here with photos, video, and diary entries. Check back weekly as we share our progress, tips, anecdotes, and more while we assemble our Factory Five Racing roadster right before your eyes. And don't forget to get the full story in an upcoming issue of Mustang & Fords.
Factory Five Racing
For more information about the 65 MK3 Roadster from Factory Five Racing, contact them at www.factoryfive.com
March 30th-June 2nd, 2008
Total Build Time: 857 hours
For those of you who've been following our Factory Five Roadster build both online and in print, I want to thank you for your words of support and encouragement. It was great to hear from so many people that enjoyed our series of build stories and especially our online diary, where we let our readers come inside the garage and see first-hand the inner workings of building a magazine project. For those that tuned in for our weekly Web updates, you were treated to exclusive images of our build progress before it even hit the magazine's printed page. Unfortunately, these last two months have been extremely busy while we merged two magazines into one, moved and changed staff, hit the busy spring and summer show circuit, and much more. I feel bad that the Web diary trickled off towards the very end due to these other pressing matters and I wanted to give our online readers some closure to the project's Web diary with this one last update covering the last nine weeks of the build.
We left off with the interior of the Roadster just getting under way with a few pieces of carpet glued down and the seat bases being installed. Since that time, we've worked on the Roadster an odd day or two each month out of the last two due to travel and workload. We finished the interior, including Schroth Profi-II FE restraints, a four-speed look shifter handle from Finishline Accessories, and a leather shift boot from Mike's Replica Parts.
Once the interior was completed, we wrapped up a few small exterior items, including brake duct screens and quick jack grommets from Finishline Accessories, an additional set of rear splash shields from Dark Water Customs to seal the body to the chassis, and we mounted the FFR supplied exhaust hangers for the sidepipes. Once these items were in place, it was time for our alignment. A trip north to Groveland, Florida, is where we hooked up with J.B. Alignment Service for a full alignment after setting our ride height and Panhard rod. Finally, we took some overall pictures of the project and posted our graduation thread on www.ffcobra.com. Stay tuned for one more assembly story coming in the September issue, followed by a final wrap-up feature on the whole project.
Factory Five Racing Discussion Forum
If you're thinking about a FFR roadster, you might want to look at the great forum hosted by Bill Pierce at ffcobra.com. This site has many answers to building these cars, events, insurance, registration, and more!