Mustang 360
The Ultimate Source for Mustang News and Reviews
Mufp 0706 23 Z Factory Five Roadster Hydroboost Brakes Install Brake Lines
Back to Article View Gallery
Back to Article
23 of 28
Many of Hydratech's kits feature preterminated hose kits. Since there are many variables building a kit such as our FFR Roadster, Hydratech provides extra-long lines and several fitting options. If you've never assembled Teflon-lined, high-pressure, braided hoses, they're a little different from a standard, rubber-lined, braided hose. After cutting the hose to length, slip the female hose nut over the hose end. Insert the brass ferrule between the outer braid and the Teflon liner, and seat the Teflon into the ferrule with a tapered punch. Apply assembly lube to the fitting and thread the fitting and female nut together. The high-pressure hose from the power-steering pump goes to the high-pressure inlet of the assist unit.
More Photo Galleries
-
![]()
Week to Wicked 1966 Mustang Build Coming Soon!
-
![]()
Fear and Loathing in the World’s Most Hated Mustang: The Finale
-
![]()
Project BYOB Gets Its Groove On With UPR’s Billet Dressup Items
-
![]()
Fear and Loathing in the World’s Most Hated Mustang: Part Four
-
![]()
Fear and Loathing in the World’s Most Hated Mustang: Part Three
-
![]()
She’s Done! Our Project 1965 Mustang Hardtop Hits the Road Again
