Mustang 360
The Ultimate Source for Mustang News and Reviews
Mufp 0703 09 Z Factory Five Roadster Gauges And Dash Install Gauge Holes
Back to Article View Gallery
Back to Article
9 of 24
Since the '65-'66 Mustang ignition switch wiring connector is not available as a separate item from the main dash harness, you'll need to use insulated female spade terminals to connect the dash wiring to the switch. We went one step further and created a small harness from the ignition switch using a four-pin Deutsch connector from MSD (PN 8187; $34.21). The wiring connections on the back of the ignition switch are, from the top (clockwise): ignition out (pink), battery in (red), start out (purple). The center stud is accessory power (brown), which we capped with a rubber plug for safety.
More Photo Galleries
-
![]()
Fear and Loathing in the World’s Most Hated Mustang: The Finale
-
![]()
Project BYOB Gets Its Groove On With UPR’s Billet Dressup Items
-
![]()
Fear and Loathing in the World’s Most Hated Mustang: Part Four
-
![]()
Fear and Loathing in the World’s Most Hated Mustang: Part Three
-
![]()
She’s Done! Our Project 1965 Mustang Hardtop Hits the Road Again
-
![]()
Fear and Loathing in the World’s Most Hated Mustang: Part Two
