Modified Mustangs & FordsProject Vehicles
Factory Five Roadster Build Part 6 - Rearend Install
Our Project Gets Rearended (But That's a Good Thing!)
We're itching for the day we can bolt on the wheels and tires to our Factory Five Roadster and roll it out of the garage. It'll be the first time since early February when we placed it on four jackstands for the beginning of the project. While we're only about halfway through the project, making it a "roller" will be a big turning point for us. There's still the drivetrain installation, lots of wiring, body fitment, painting, and more before the project will near completion, and then we still have to title, register, and insure the car. With so much to do, we'll take the small victories anytime we can.
Of course, we can't bolt up our wheels without suspension and hubs/drive axles. In Part 3 in the August issue, we installed the majority of our Roadster's suspension parts. This month, we take delivery of a custom-built axlehousing and bolt the Factory Five mounting brackets to it for installation into the Roadster's frame.
Next month, we'll install the rearend and brakes. Then we'll be able to get our wheels in place. Once they're on, we can set ride height via the adjustable coilover shocks and torque all of the suspension hardware one final time.
As many of you know, the Factory Five Roadster is based around using donor or new parts designed for the hugely popular '86-'04 V-8 Mustang, including the drivetrain. For the rear-axle portion of our build, we had several options, including installing a 9-inch Ford housing designed for said Mustang model years, or a production Mustang housing, again from said model years, which is Ford's corporate 8.8-inch housing with integral carrier gear design. The 8.8-inch housing is immensely popular for its strength and light reciprocating weight, and can be found in everything from Mustangs to F-series trucks, Explorers, Crown Vics, and Lincoln Town Cars. Even classic Mustang owners are swapping to the 8.8s, but that's another tech story.
The '86-'93 Fox Mustang housing is what the original Factory Five dimensions are based upon and offers the widest rear-wheel choices because it is the narrowest Mustang rear at 59-1/4 inches. The '94-and-up rearends grew wider as the body style changed and disc brakes were added. If you are on a budget, the stock 8.8-inch housing will work fine for a donor build, but with the 500 hp we'll have on tap, we decided to build something a bit stronger while still allowing bolt-in functionality of the Factory Five suspension parts.
We contacted Drivetrain Specialists (DTS) in Michigan for some ideas. We knew we wanted the narrowest rear possible for some serious rear rubber, so DTS obliged by building us a "Fox width" axle assembly and stuffing it with all sorts of goodies from Eaton, Strange, Ford Racing, and more. After discussing the details with Mike Rosales at DTS, he had his guys Adam, Patrick, and Josh break out the welder and pull the parts from stock to build us one tough rear axle. DTS not only offers parts for most any rear for repairs and upgrades (such as gears, bearings, and seals) but it can custom build just about any rearend you can think up-such as our 8.8-inch unit for our Roadster-including custom fab work, powdercoated housings, brake kits, and so on.