Editor_Turner
April 3, 2013

 

If your brake system doesn't offer a parking brake, Wilwood has a new option. Check out the official press release after the jump...

 Camarillo, CA, February, 2013: Wilwood Disc Brakes is pleased to announce the new multi-use MC4 Mechanical Parking Brake Caliper.

This cable operated brake caliper combines high output performance with simplicity in design and construction, and is the perfect solution for vehicle applications requiring a separate, mechanically actuated parking brake caliper.

Built to accept rotors that are .810” thick, with 11.00” - 12.88” diameter range, the MC4 combines an efficient die cast body with a forged billet anvil for superior strength under load, yet is lightweight at only 3.30 (2.95 without pads) pounds.

Supplied with each caliper is Wilwood’s Composite Metallic (CM) high-friction, high static-hold brake pads, and are pre-fitted with noise cancelling shields.

Engineered with noise-dampening features for quiet, rattle-free operation, the MC4 sliding caliper includes a steel bracket for convenient mounting.

Available in both right-hand and left-hand construction, the caliper’s lever cartridge can be clocked in three positions for optimum positioning and ease of cable routing.

The 1.19” aluminum piston is fully dust booted to keep moisture and debris out.

Each caliper is fitted with a cable return spring, and the mechanical lever accepts a .310” diameter barrel-ended parking brake cable (available from Lokar).

The convenient manual adjuster requires no special tools, allowing incremental adjustment to compensate for pad and rotor wear.

MC4 calipers are available with either black (P/N 120-12069/70-BK), silver (P/N 120-12069/70) or red (P/N 120-12069/70-RD) high-gloss, high-temp, brake fluid resistant powder coat and feature Wilwood’s signature logo.

Wilwood performance aftermarket brake calipers are loaded with features and technology built from decades of domination in world motorsports, and the proven reliability of Zero PPM defect quality supply to leading OE manufacturers around the world.

For more information contact: Wilwood Engineering at (805) 388-1188 and request to speak with Erika Gordillo for marketing issues, or Andy Fritts for technical questions.

Also, Wilwood’s website is accessible at www.wilwood.com or e-mail customerreply@wilwood.com

Photo Gallery

View Photo Gallery