5.0 Mustang & Super FordsNews & Views
Reduce Turbo Lag and Excessive Heat With DEI’s GEN-II Titanium Turbo Shield
Want to keep your turbo's heat in check? DEI has a new turbo heat shield for your consideration. Check out the official press release after the jump...
Avon Lake, Ohio (March 11, 2013)…Turbochargers and other bolt-on modifications can generate excessive radiant and direct heat. Too much heat can greatly compromise engine efficiency. Turbochargers have been known to bake paint off hoods, melt electrical wiring, oil feeds and return lines.
Design Engineering (DEI), the leading manufacturer of high performance thermal control products, has the solution – GEN-II Turbo Shield with LR Technology designed to be a custom fit for all T3, T4, T6 and T25/28 turbochargers. Constructed from pulverized lava rock, extruded into fibers and then woven into a tight weave, gives this material titanium-like strength and durability. A high temperature rated silica fireproof insulation padding serves as added protection to handle direct continuous heat up to 1800° F (980°C) and up to 2500° F (1370°C) of radiant heat. The GEN-II Titanium Turbo Shield has an upgraded, thicker, fireproof core and a special high-temp material to protect and reinforce seams vulnerable to higher heat, produced from higher horsepower turbos.
Any car, truck, SUV or diesel equipped with a turbocharger needs a shield with titanium like strength for extra protection, including racers where intake temps are extremely important to performance. The GEN-II turbo shield keeps heat inside the turbo allowing the turbo to spool up faster while reducing radiant temperatures resulting in cooler air intake temps for improved performance and a noticeable boost in horsepower. The shield provides added protection against burns when in close contact with the turbo and reduces the risk of a flash fire that can occur from oil or gas coming in contact with a hot turbine.
Anchoring hooks are strategically located on the shield for secure fastening to the turbine housing. DEI’s GEN-II Turbo Shield can be purchased separately or as a kit.
The kit includes a 2”x15’ roll of Titanium pipe wrap, two 20” stainless steel zip ties and 5’ of fastening wire.
For more information about the GEN-II Titanium Turbo Shield including dimensions or other DEI thermal control products go to www.designengineering.com, call 800-264-9472, or e-mail: sales@DesignEngineering.com.
• Increases Horsepower by Reducing Heat Transfer
• Reduces Risk of Burns or Flash Fire
• Cool Carbon Fiber Look with Titanium Like Strength
About Design Engineering, Inc. (DEI) Design Engineering, Inc. is a manufacturer and distributor of thermal control (DEI) and sound control products (Boom Mat) , Cryogenic cooling systems (CryO2™), nitrous oxide systems (Ny-Trex), performance cooling system additives (Radiator Relief) and turbo charger systems and components (SPA Turbo). DEI sells into a wide variety of distribution channels including performance automotive aftermarket, motorcycle, powersports, industrial supply, heavy equipment, aerospace, marine, RV, tractor trailer and motorcoach markets.