Kristian Grimsland
Associate Editor, Muscle Mustangs & Fast Fords
November 1, 2013

Deep Exhale

BBK Performance has recently released its all-new shorty headers for '11-'14 V-6 Mustangs. According to BBK, its new shorty headers will increase horsepower and torque, while giving your Stang an even better sound. Each piece is a direct-fit design constructed from 15/8-inch, mandrel-bent tubing, and features laser-cut exhaust flanges. Pricing starts at $299 for chrome-coated and $399 for silver-ceramic–coated.

Web: Phone: 951.296.1771

Fight Back

Driven Racing Oil's Carb Defender fuel additive is specifically formulated to protect against ethanol corrosion and induction deposits. Special corrosion inhibitors work to prevent expensive repairs and diminished performance caused by ethanol-blended pump gasoline. High levels of ethanol dilution in motor oil can lead to rust and other corrosion problems in the fuel system and engine. According to Driven, its additive controls combustion chamber residue, and cleans and protects surfaces of the fuel system and intake tract. The additive treats up to 25 gallons of ethanol-blended gas, and should be used with each and every fill-up.

Web: Phone: 866.611.1820


Check out Cervini's latest creation—the Stalker Ram Air Hood for all '13-'14 Mustangs and '10-'14 GT500s. Not only does the hood look good, it also force-feeds cool air into your engine compartment. Twin exterior vents help expel heat from underneath the hood, thus reducing engine compartment temperature. Hoods are available painted starting at $349.

Web: Phone: 800.488.6057

Spin Freely

Performance Automatic is proud to announce its latest addition to its Ford Performance Transmission line of parts—driveshaft slip yokes. Its slip yokes are designed to complement its Ford Street Smart Systems, made from forged steel and designed to exact OEM specs. Performance Automatic has yokes to fit C4, AOD, AODE, and 4R70W transmissions. Get the correct driveshaft slip yokes the first time from Performance Automatic.

Web: Phone: 240.439.4650

It's a Miracle

AMSOIL's Miracle Wash Waterless Wash & Wax is a quick and convenient automotive wash that delivers outstanding performance in an economical spray can. Once applied, it protects against the sun's ultraviolet rays, repels light dirt and dust, and leaves vehicles with a shiny, tough, protective finish. Use is simple, with just two easy steps and no water. When applied, specially formulated surfactants lift dust and dirt from the surface and hold it in suspension. Miracle Wash then acts as a shield protecting the surface from abrasion while you wipe the surface clean. Miracle Wash can be used on cars, trucks, motorhomes, motorcycles, and more.

Web: Phone: 800.956.5695

Fuel Flow

DeatschWerks is proud to announce its new line of fuel pumps for '85-'10 Mustangs, '99-'04 F-150/250 trucks, and Focus RSs. The 255-lb/hr DW200 ($99), 265-lb/hr DW65c ($149), and 320-lb/hr DW300 ($169) are high-quality, time-tested fuel pumps. DeatschWerks pumps always ship with an application-specific fitment kit at no extra cost, so the pump will drop right in. The new fitment kits allow DW's pumps to fit the vehicle years as stated above. All DeatschWerks products are E85 compatible and come with an industry-leading three-year warranty.

Web: Phone: 800.419.6023

Inject This

If you're a Fox-body owner, then check this out. Ron Francis Wiring has recently released its new '87-'93 Fox-body 5.0 injector harness. It's new harness matches the factory dimensions for easy, trouble-free installation. Whether you're restoring a Fox-body or want a brand-new injector harness, this is the answer you've been looking for.

Web: Phone: 610.485.1981

Run It

McKeown Motorsport Engineering is now offering the world's first aftermarket Cleveland block. Its name? Titus. Accepting standard Cleveland accessories and hardware, these new larger displacement blocks are available in aluminum or cast iron, with deck heights of 9.2 inches or 9.5 inches, and with bore sizes ranging from 4.00 inches to 4.20 inches. Suitable for both street and strip, it's also designed to handle high-horsepower applications. The lubrication system has been redesigned for priority oiling to the main bearings with the ability to adjust oil flow elsewhere. Pricing starts at $4,800.

Web: Phone: 301.932.9292