Related Photo Galleries
Here are the new 3-Link suspension components from Revelation Racing Supply. At the top is the rear-axle torque arm, which is made to install onto the rear axlehousing using the differential stud pattern. The forward end of the arm pivots in the front crossmember. That is the equal-length Watts linkage setup shown alongside the coilover shocks made by Koni. The coil springs on the outside of the shocks are manufactured by Eibach. The coilover shocks allow for complete ride-height adjustability. The rear main crossmember is at the center of the picture while the front crossmember is just below it. The two trailing arm assemblies are shown at bottom along with the mounting brackets that tie the suspension members together. A wide variety of specialized fasteners are included in the kit.