Mustang 360
The Ultimate Source for Mustang News and Reviews
Ratchet T30 Torx Bit 11mm
Back to Article View Gallery
Back to Article
3 of 12
Here are the tools needed for the job. You’ll need a ratchet, a T30 torx bit, and an 11mm socket. You’ll need a deep-well socket, though, we had both just in case. The T30 torx bit is for the rear panel trunk trim, and the 11mm socket is for the taillight hardware. There are three 11mm nuts per side that need to be loosened in order to remove and install the taillights.
More Photo Galleries
-
![]()
Update Your Mustang’s Wiring From Bumper to Bumper
-
![]()
1966 Week To Wicked: Auto Meter
-
![]()
Acquiring and displaying engine data is easy and effective with multifunctional gauges from Innovate Motorsports
-
![]()
How to replace a turn signal switch on a 1994-2004 Mustang
-
![]()
Week to Wicked 2013 Ford Mustang Build Presented by Continental Tire
-
![]()
Quick How-To For a Nicer Looking Interior: Stainless Steel Sill Plates
Mustang 360
Subscribe to a Magazine
© 2018 MUSTANG 360 NETWORK
MOTOR TREND GROUP, LLC.
ALL RIGHTS RESERVED.