Mustang 360
The Ultimate Source for Mustang News and Reviews
Mump 0303 20 Jesel Rocker Roller Installation
Back to Article View Gallery
Back to Article
20 of 22
The baffle is already removed from this passenger-side cover (with the oil-filler neck). To allow the Jesel rockers to fit, this mounting area where the baffle bolts to the cover will need to be ground down for the front pair of rockers to clear. The driver-side cover seemed to fit with no mods. For extra clearance, you can also use a second set of valve-cover gaskets along with longer valve-cover bolts, which would help provide the required room.
More Photo Galleries
-
![]()
Heat Blocking, Noise Cancelling Technology
-
![]()
Vintage Mustang Tech Advice for an Overheated 1965 Mustang Convertible
-
![]()
1,000 HP Streetable Turbo Engine
-
![]()
Dropping ETs With Edelbrock’s Progressive Nitrous Oxide System
-
![]()
Bolt-On Coil-On-Plug Tech for Fox-Body & SN95 Mustangs
-
![]()
How It Works: Edelbrock’s HIP Cylinder Head Casting Tech
