Mustang 360
The Ultimate Source for Mustang News and Reviews
Mufp 0607 01z Boss 409 Engine Build Bottom End
Back to Article View Gallery
Back to Article
2 of 27
This is the Dart cast-iron 8.2-inch low-deck block (PN 313847) with four-bolt main caps, a priority main oiling system, and siamesed cylinder bores. This block is based on the old Boss 302 with an 8.2-inch deck, 4-inch bores, and 2.249-inch main journals. The block is sonic-checked and treated to a 0.250-inch overbore (that's 1/4 inch!), bringing bore size to a whopping 4.250 inches. With a stock bore spacing of 4.380 inches, this leaves a scant 0.130 inch between cylinders. But not to worry, Chevrolet buffs have been doing this with big-blocks for years.
More Photo Galleries
-
![]()
Heat Blocking, Noise Cancelling Technology
-
![]()
Vintage Mustang Tech Advice for an Overheated 1965 Mustang Convertible
-
![]()
1,000 HP Streetable Turbo Engine
-
![]()
Dropping ETs With Edelbrock’s Progressive Nitrous Oxide System
-
![]()
Bolt-On Coil-On-Plug Tech for Fox-Body & SN95 Mustangs
-
![]()
How It Works: Edelbrock’s HIP Cylinder Head Casting Tech
