Mustang 360
The Ultimate Source for Mustang News and Reviews
Due to the EU’s Global Data Protection Regulation, our website is currently unavailable to visitors from most European countries. We apologize for this inconvenience and encourage you to visit www.motortrend.com for the latest on new cars, car reviews and news, concept cars and auto show coverage, awards and much more.MOTORTREND.COM
Mufp 0602 22z Ford 331 Stroker Engine Build
Back to Article View Gallery
Back to Article
22 of 28
You won't find an Edelbrock Performer RPM Air Gap manifold like this one on the shelf. Marvin pulls these rascals out of the box from Summit Racing and massages them to MCE standards. He works the passages and does a port match, then he works the plenum area to improve airflow and reduce turbulence. A 1/2-inch phenolic carburetor spacer improves torque and keeps the heat farther away from the carburetor. Note the absence of rough edges in the plenum, which results in less turbulence and air disruption.
More Photo Galleries
-
![]()
Starting an Engine for the First Time
-
![]()
Street Thumper 347ci Build
-
![]()
Installing a ProCharger F-1A-94 In Search Of 8-Second Timeslips
-
![]()
Prepping a Mustang 6R80 Automatic Transmission for 1,000 HP
-
![]()
Unlocking EcoBoost Performance with a Livernois MyCalibrator Touch Tuner
-
![]()
Combining JLT Performance, a 2018 Mustang GT with Li Tuning & Racing
Mustang 360
Subscribe to a Magazine
© 2019 MUSTANG 360 NETWORK
MOTOR TREND GROUP, LLC.
ALL RIGHTS RESERVED.