Back to Article
15 of 36
For our conversion we are installing a 73mm MAF meter, which will work well with our high-flowing Accufab 70mm throttle body, EGR spacer, and 24-lb/hr injectors. First, we needed to bolt the satin-black bracket with the three bolts to the MAF meter. Depending on whether you're using an aftermarket cold-air induction or even a supercharger, you may or may not need to use this bracket. Be sure to test-fit your MAF meter and bracket in place with your short-ram inlet before bolting everything together. That will help you to determine proper fitment and placement of your MAF meter assembly with your specific application. Also make sure your MAF meter is mounted in the correct direction according to the arrow molded into the top of the MAF connector.