Mustang 360
The Ultimate Source for Mustang News and Reviews
Mmfp 0910 07 Z Mass Airflow Conversion Remove Breather Hose
Back to Article View Gallery
Back to Article
6 of 36
Next we removed the breather hose from the throttle body and the two coolant hoses that are connected to the EGR spacer. We unplugged the wiring from the idle air control valve and removed the throttle position sensor from the throttle body. Once this was done, we removed the two bolts holding the throttle cable bracket in place and were able to pop the throttle cable off of the ball mount. Then we unplugged the wire harness from the EGR valve.
More Photo Galleries
-
![]()
Heat Blocking, Noise Cancelling Technology
-
![]()
Vintage Mustang Tech Advice for an Overheated 1965 Mustang Convertible
-
![]()
1,000 HP Streetable Turbo Engine
-
![]()
Dropping ETs With Edelbrock’s Progressive Nitrous Oxide System
-
![]()
Bolt-On Coil-On-Plug Tech for Fox-Body & SN95 Mustangs
-
![]()
How It Works: Edelbrock’s HIP Cylinder Head Casting Tech
