Mustang 360
The Ultimate Source for Mustang News and Reviews
Mdmp 2011 07 Boss429 014 The New Boss
Back to Article View Gallery
Back to Article
15 of 26
14 Because the heads simply flowed too much air for the 432-inch combination, the intake ports were filled in with Z-Spar to restrict airflow by about 35 percent. But even with that, the heads flow about 416 cfm and could benefit from about 100 additional cubic inches to fulfill their potential. Bottom line: The stock Boss 429 had way, way too much cylinder head for the street.
More Photo Galleries
-
![]()
Heat Blocking, Noise Cancelling Technology
-
![]()
Vintage Mustang Tech Advice for an Overheated 1965 Mustang Convertible
-
![]()
1,000 HP Streetable Turbo Engine
-
![]()
Dropping ETs With Edelbrock’s Progressive Nitrous Oxide System
-
![]()
Bolt-On Coil-On-Plug Tech for Fox-Body & SN95 Mustangs
-
![]()
How It Works: Edelbrock’s HIP Cylinder Head Casting Tech
