Mustang 360
The Ultimate Source for Mustang News and Reviews
M5lp 1107 03 O BBK Long Tube Headers Install Transmission
Back to Article View Gallery
Back to Article
4 of 15
Before you get down to business on the stock manifolds, you’ll want to support the drivetrain with a jack under the transmission. Then you can remove the starter, remove the motor mount, remove the tubular brace under the oil pan, and disconnect the steering shaft U-joint and let the shaft hang out of the way. Then you can unbolt the stock manifold and remove it and the gasket.
More Photo Galleries
-
![]()
Heat Blocking, Noise Cancelling Technology
-
![]()
Vintage Mustang Tech Advice for an Overheated 1965 Mustang Convertible
-
![]()
1,000 HP Streetable Turbo Engine
-
![]()
Dropping ETs With Edelbrock’s Progressive Nitrous Oxide System
-
![]()
Bolt-On Coil-On-Plug Tech for Fox-Body & SN95 Mustangs
-
![]()
How It Works: Edelbrock’s HIP Cylinder Head Casting Tech
