Mustang 360
The Ultimate Source for Mustang News and Reviews
P46404 Image Large
Back to Article View Gallery
Back to Article
5 of 29
To remove the lower intake, you will need to remove the distributor. Index the rotor to the edge of the distributor with a permanent marker and pull the distributor free. This will allow you to insert the distributor back in the same place (providing the engine isn't turned). Remove the intake manifold's 12 bolts and pry the manifold free of the heads. Loosen the bolt holding the heater tube last. Sometimes you can pull the intake and tube together.
More Photo Galleries
-
![]()
Heat Blocking, Noise Cancelling Technology
-
![]()
Vintage Mustang Tech Advice for an Overheated 1965 Mustang Convertible
-
![]()
1,000 HP Streetable Turbo Engine
-
![]()
Dropping ETs With Edelbrock’s Progressive Nitrous Oxide System
-
![]()
Bolt-On Coil-On-Plug Tech for Fox-Body & SN95 Mustangs
-
![]()
How It Works: Edelbrock’s HIP Cylinder Head Casting Tech
