Mustang 360
The Ultimate Source for Mustang News and Reviews
Mump 0812 23 Z Install Sway Bars Secure Endlink
Back to Article View Gallery
Back to Article
23 of 23
Complete the installation by securing the endlink bolts onto the lower control arms. Installation order here is: a bolt, a washer, a bushing, the bar, another bushing, another washer, the spacer tube, another washer, the flat side of a bushing against the front lower control arm, the control arm, another bushing, another washer, and the Nylock nut. Securely tighten all the hardware and you're all set to go. Now is a good time to consider a front-end alignment to make sure all the settings are correct.
More Photo Galleries
-
![]()
Replace Weak Stock Mustang Framerails with a New Front Subframe
-
![]()
New Edge Suspension Tech: Installing Maximum Motorsports Adjustable Front Sway Bar
-
![]()
Installing Maximum Motorsports Panhard Bar for Predictable Handling on Any New Edge Mustang
-
![]()
New Edge Tech: Better Axle Behavior With Maximum Motorsports’ Sport Lower Control Arms
-
![]()
How to Install All-New Koni Sport Shocks Onto Any S550 Mustang
-
![]()
Geometry Lesson: Installing Heidts' Pro-G IFS in a 1968 Mustang
