Mustang MonthlyHow To Chassis Suspension
How To Spot A Fake '65-'66 GT
Though It Is More Difficult Each Year, We Look To See What Makes A '65-'66 GT
The venerable and vaulted GT suffers under some of the same angst as other high-performance vehicles. There are probably, per capita, more GTs on the road today than there were when the cars were new. Who can blame the copycats? After all, these cars fetch more money than a standard fastback or hardtop-not only that, but also the GT carries a mystique that draws people.
Even so, when you are out there trying to buy into that mystique, you don't want your purchase to be a Johnny-come-lately or some cobbled-up mess-you want the real thing. Obviously, as fakes go, there are cars that range from poorly done to well done. What is really scary today is that the knowledge on these cars is so great that good fakers can fool even the best experts. All the parts are certainly available to do it, too. You can get all the badging, exhaust hangers, and a correctly riveted door tag from any of the vendors that market Mustang parts.
So with all that said, how can you distinguish a real GT from a fake? You can't, because dealers in 1965 actually "made" GTs. That's right. They did just what today's fakers do: They raided the parts bin and made GTs from standard hardtops, convertibles, and fastbacks. Ouch. This truly adds a certain murky quality to being able to tell a real GT from a fake. Why? Because the Mustang community considers these GTs to be legitimate due to the fact that they were cobbled together at the original-selling dealer.
What Makes a Factory GT
- Side tape stripe
- GT badging
- GT-lettered gas cap
- Dual trumpet exhaust
- Deleted side chrome
- Five-dial instrument cluster
- 289 4V or 289 4V Hi-Po
- Special handling package
- Front disc brakes
There are some items that are particular to the Hi-Po, whether it's in the GT or not. Some items are listed in the story, while other obvious items are listed below.
- Special C4 on '66 automatics (quite rare)
- Nine-inch rear axle
- No bumper on the body for the 9-inch pinion snubber (snubber was on the housing)
- Larger, stronger universal joints
GT or Not?
In the final analysis, not only did the convertible turn out to not be a GT, but our '65 was a '66. The best recommendation is that the buyer should beware. Know your GTs, know what they are supposed to have, and try to obtain as much info from the owner as possible. The better armed you are with info, the better you'll be able to discern what the real deal is on the GT.