Mustang MonthlyHow To Chassis Suspension
Fox Handling Upgrades, Part 2 - Rear Grip Package
Maximum Motorsports’ Rear Grip Package for ’79-’04 Mustangs improves adhesion and cornering
Talk about great value in a used '79-'04 Fox/SN-95 Mustang! This popular Mustang generation can be had for a song if you're looking for affordable and sporty daily or weekend transportation. Hands down the most affordable is the '85-'93 Mustang GT and LX with 5.0L High Output V-8 power and Quadra-Shock suspension because you can get into these cars for not much money, which frees up cash for terrific upgrades like Maximum Motorsports' Rear Grip Package.
Gil Ruiz of Mustangs Etc. in Van Nuys, California, snapped up his '89 Mustang GT convertible for $500. His boss, General Manager Mike O'Brien, did the same thing with a '93 Mustang GT hatchback also in need of a little massaging. Both cars run and were salvageable rides for under a grand. And for under a grand, Maximum Motorsports can set you up with a vastly improved rear suspension package and a completely renewed driving experience. It is known as the Rear Grip Package consisting of a Panhard bar and lower control arms. Maximum Motorsports has also provided us with new Ford upper control arms and bushings to tighten everything up nicely. Check out these upgrades and stay tuned for our final installment where everything is tested for before and after evaluation.
01. One of the first things Gil does is measure ride height as the car sits from the factory. He does this at all four corners on a perfectly level surface.
02. Gil’s ’89 Mustang GT has aftermarket upper and lower control arms, which have done a nice job and afforded him improved stability. With Maximum Motorsports’ Rear Grip Package, we’re going to make it better. When you’re doing an upgrade like this, be mindful of clearance issues such as larger diameter tailpipes, which can get in the way.
03. We have the good fortune of a lift at Mustangs Etc. The rear axle is supported with pole jacks/stands, which will give us support throughout this upgrade.
04. With the rear axle properly supported, the shock absorbers are disconnected first using a 15mm socket and boxed-end wrench.
05. The horizontally mounted shocks are disconnected and removed next as shown using a 15mm socket. The nut, which is secured to the bracket, is 18mm.
06. The rear sway bar is removed using a 15mm socket. Maximum Motorsports offers a heavy-duty rear sway bar, which greatly reduces body roll and keeps a Mustang upright. That will be installed in Part 3 of this series, along with the torque arm.
07. Inside the trunk/cargo area are the upper shock mounts, which are usually easier to remove with a boxed-end wrench in coupe/convertibles and a deep socket in hatchbacks.
08. With the axle properly supported, the upper and lower control arm bolts are removed using an 18mm socket and boxed-end wrench. These are aftermarket control arms previously installed when the factory arms gave out.
09. Once the control arms are free of the axle housing the axle housing is lowered and the coil springs are easily removed.
10. Upper control arm bushings are removed and replaced using this cool removal and installation tool provided by Maximum Motorsports. White lithium grease is used for lubrication to easy installation.
11. Maximum Motorsports has provided us with stock Ford upper control arms, which will clear everything and provide proper support.