Mustang 360
The Ultimate Source for Mustang News and Reviews
Remove Driveshaft Front
Back to Article View Gallery
Back to Article
9 of 24
5 Now it's time to tackle the front half of the driveshaft. Using a 12-point/12mm socket with an airgun, bang these suckers off. The center bearing is held in place with two nuts that come right off with a 13mm deep socket.
More Photo Galleries
-
![]()
Replace Weak Stock Mustang Framerails with a New Front Subframe
-
![]()
New Edge Suspension Tech: Installing Maximum Motorsports Adjustable Front Sway Bar
-
![]()
Installing Maximum Motorsports Panhard Bar for Predictable Handling on Any New Edge Mustang
-
![]()
New Edge Tech: Better Axle Behavior With Maximum Motorsports’ Sport Lower Control Arms
-
![]()
How to Install All-New Koni Sport Shocks Onto Any S550 Mustang
-
![]()
Geometry Lesson: Installing Heidts' Pro-G IFS in a 1968 Mustang
