|
|
1965 Mustang Coupe - What A Drag
Rick Lane Rolled With The Punches And Went From Drag Car To Show Car With His '65 Coupe
By Mark Houlahan
Photography by James Pickett
The '65 Mustang you see on these pages has certainly come a long way. While it didn't hap-pen overnight (in reality it was more than five years), Rick Lane's idea to build a drag car with some street manners he could enjoy at the local dragstrip started with a solid plan. The '65 had been sitting forlornly under a carport behind a friend of a friend's mother's house for almost 20 years. Time and the elements weren't kind to the little coupe, but that didn't matter to Rick, who hails from Mt. Airy, Maryland. He was building a drag car, remember? Sure, it'd have some minor creature comforts, but his main plan was to attack the nearby 75-80 Dragway with a stout performance package in a light classic Mus-tang. Rick has owned nearly a half-dozen Fox Mustangs over the years and knew that they were great performance machines. For this specific car, he wanted to do the same but in a classic Mustang body.Rick should have known his coupe project was going to have its share of problems when he couldn't even get it out of the owner's driveway. A second, larger tow truck had to be called in to pull out the roll back that Rick had hired to transport the car. He found out, first hand, that soft dirt and a lot of weight is not great for traction. Nevertheless, Rick finally got his new purchase back to his home shop where he and his close friends Brandon, Butch, Choya, and Omar dug into the project with a fervor. They began by stripping the car to a bare shell for the installation on a rotisserie for all of the planned chassis modifications required of a drag car. With chassis work progressing, including a ladder bar rear suspension, seam welding, and a custom rollcage by HFR Fabrications being installed, Rick got word that the 75-80 Dragway was closing its doors. After a year's worth of work on the rotisserie, Rick's plan was all of a sudden heading down a dead-end path. What to do?Rick took a hard look at the project and realized that he could enjoy the car more with his family if he turned it into a show car that was wild enough to catch the public's eye, yet still sane enough to drive the whole family down to the local ice cream stand for a couple of sundaes on a Saturday night. Thus, a new plan was devised-one that could utilize the work already done to the car-sort of a junior pro-touring effort if you will. With the chassis still on the rotisserie, Rick started on the show-car upgrades, including shaving the door handles, drip rails, and cowl opening. All this extra work added even more time to the already lengthy build process. "What seemed like an eternity, are now just vague memories," Rick says. "Thankfully, we have pictures throughout the build process to minimize the desire to do this again. Who am I kidding?" Certainly not us, Rick.Without going completely one-off... Without going completely one-off custom on the dash, Rick was still able to give his Mustang a unique look with some smoothing, a waterfall like console, body color paint on the dash and 'cage, and a couple of cows worth of leather.
Discuss in Our Forums
Ford Mustang Research
Our comprehensive information will allow you to compare the new Ford Mustang and review specs, photos and more. The 2010 Mustang goes for a suggested retail price of $32,995.00, and has drivers side crash test ratings of 5 stars and passengers side crash test ratings of 5 stars. The Mercury Milan and the Ford Shelby GT 500 are other vehicles that might interest you.
|
|