This impressive '67 Mustang coupe is a shining example of the excellent result that can be achieved starting with a garden-variety coupe. While not as valuable in a monetary sense as a fastback or convertible, they still possess the same timeless styling and performance potential that comes with any classic Mustang. Because they are much more plentiful, the ante to get into the game with a coupe is usually half the cost of a fastback or convertible. Then there are those of us who prefer the coupe regardless of cost. For those who want an enclosed car with solid top and a formal roofline the Mustang coupe is the only way to fly. That's what Glenn and Kelly Thomas of San Leandro, California, would tell you, and they are the happy owners of this good-looking example. Actually Glenn's taste for coupes may have developed early on, as he fondly remembers driving his Mom's California Special while he was back in high school. For this new coupe project, Glenn formulated a plan for bigger-than-average performance in every department and it included overdrive and air conditioning, as well as a more powerful engine.
Before the plans could be implemented there was a considerable amount of bodywork required. Cowl and floorpan replacement were just two of the major projects involved in bringing the body back to a perfect standard. At this time subtle exterior changes were added. They included the rear spoiler, Thunderbird taillights, sidescoops, and a Shelby hood. Once the bodywork was completed Glen had his friend Victor Lima apply the DuPont Sapphire Blue paint. In the powertrain department he decided that bigger was better and he tossed the 289ci V-8 in favor of a Windsor-based 392ci stroker engine. The C4 three-speed automatic went out the window also and was replaced with a G-force modified T5 five-speed manual.
Going from a tired 289 to the healthy 392 almost doubled the horsepower and all of a sudden the car's performance envelope got a lot bigger. This resulted in the fact that there would be a lot of work to do making sure the rest of the car was up to the performance demands created by the extra horsepower. Glenn began with the underpinnings and installed all new suspension components from Mustangs Plus both front and rear. In addition to new upper and lower control arms, a set of 620 coils were installed in front, while five leaf mid-eye springs were used out back. Body roll was brought under control using a 1-inch diameter front antisway bar.
The final reports are in and not surprisingly the reviews are all good. The car runs hard and corners flat and that's just what we would expect. Judging from the severely lowered stance and full roll bar, it's a safe bet that Glenn and family have plenty of fun with this cool coupe on the back roads of central California.
The metal-trimmed door panels...
The metal-trimmed door panels were used on the deluxe interior and the central A/C register indicates that this was originally a factory air-conditioned car. The custom seats certainly offer more lateral support than the factory buckets, something that's very desirable if your car corners like a go-kart. The Grant steering wheel, Hurst shifter, and Auto Meter instruments set in the factory openings give the interior a boy racer flavor that's appropriate to the car.
For severe cornering duty...
For severe cornering duty there's nothing like a low center of gravity and with this vehicle stance he's got it. Glenn lowered the floorpan in the car by 1 inch when he replaced it, further lowering the loaded roll center. The Shelby taillights are actually borrowed from the Thunderbird parts bin and they look great on Mustangs, Shelby's or Thunderbirds. The rear valance treatment and quad exhaust tips are factory GT style.
There's no denying that a...
There's no denying that a Windsor looks like it was made for a perfect fit in the '67 and '68 Mustangs even though it wasn't available until 1969. The generous internal architecture of the Windsor block makes it the ideal candidate for enlarged displacement engines by elongating the stroke. Achieving a 392 cubic inch displacement is a cinch and now a small-block Mustang can run with the big boys.
With the rear spoiler and...
With the rear spoiler and other similar adornments it's possible to see reflections of the California Special Glenn got to drive and learned to love as a kid. The snake in the grass stance looks killer on this coupe and he's got an appealing blend of California Special and Shelby showing on this car. The pony and corral delete, modified valance and European-style driving lights give the front end an interesting look.
Glenn and Kelly Thomas' '67 Mustang Coupe
- 392ci Windsor
- 4.030-inch bore
- 3.85-inch stroke
- Built by S & S Automotive Machine Shop Service of San Leandro, California
- Ford Racing steel crankshaft
- Ford Racing forged steel connecting rods
- Ford Racing forged aluminum pistons
- Comp Cams Magnum hydraulic camshaft, 0.518 lift, 292-degrees duration, 110 lobe center angle
- Edelbrock Performer RPM aluminum cylinder heads
- Edelbrock Performer RPM aluminum intake manifold
- Edelbrock 800 cfm four-barrel carburetor
- MSD Pro Billet distributor
- G-force modified Tremec T5 five-speed
- Ford Racing heavy-duty clutch assembly
- 9-inch axle housing
- Traction-Lok differential
- 3.50 gears
- Hooker Super Competition headers
- 2 1/2-inch exhaust system
- MagnaFlow mufflers
- GT exhaust tips
- Front: Mustangs Plus 620 coil springs, upper and lower controls arms, 1-inch sway bar, Monte Carlo bar, Flaming River rack-and-pinion steering
- Rear: Mustangs Plus mid-eye leaf springs
- Front: 11-inch disc, four-piston caliper
- Rear: 11-inch disc, single-piston caliper
- Front: American Racing Torq Thrust II, 17x8
- Rear: American Racing Torq Thrust II, 17x8
- Front: Yokohama, P225/40R17
- Rear: Yokohama, P245/40R17
- SCAT Pro Car bucket seats, custom black upholstery by Glen and Matt Thomas, Pioneer stereo with 6x9 speakers mounted in custom package tray, Hurst shifter, Flaming River tilt-steering column, Auto Meter Phantom tachometer and speedometer, central gauge pod with Auto Meter gauges, Grant steering wheel, Hump Hugger console, center mounted third brake light
- DuPont sapphire blue paint, GT 350 rocker stripes, Shelby hood, sidescoops, rear spoiler, modified front valance, '69 Mustang mirrors, sequential Thunderbird/Shelby style taillights, Lucas driving lights, grille corral deleted, Cobra emblems on grille and fenders