As you can see from this photo Tim didn't waste any time trying to improve on perfection.
When Tim Albers began this '70 Mustang project he wanted to create a car that paid homage to the pinnacle of design excellence achieved when Ford introduced the SportsRoof Mustang. The highest incarnation of this car was offered by Ford as the Boss 429 in 1969 and 1970. The cars came equipped with the purpose-built "Blue Crescent" race engine designed specifically with NASCAR in mind. The big Boss cars carried a distinctive hoodscoop and chin spoiler to distinguish it from the others of the breed, but little else by way of embellishment was used or required. The Boss cars were all business and they didn't need a lot of decoration to advertise their special status.
Tim wanted to preserve this visual heritage while breaking some new ground in the technology department. He wanted a car that would run as hard as a Boss 429. However, that engine is 40 years old now and it would be both expensive and difficult to duplicate the exotic powerplant today. In addition, Tim was after enhanced reliability. When he finally chose his engine option he certainly did take advantage of all that modern technology has to offer for maximizing induction potential. Tim chose to go with the 32-valve supercharged GT500 crate engine offered by Ford Racing Performance Parts. By adding a Whipple 3.4L supercharger upgrade we're talking in the area of 750 horsepower on tap, which goes way beyond the original Boss 429 ratings or even that of a new Shelby G.T. 500 for that matter.
For 1970 Boss cars were devoid of the sail panel emblem, faux quarter scoops, and metal fe
The project started with a garden-variety '70 Mustang SportsRoof Mustang, which came originally equipped with a 302 V-8 and a C4 three-speed automatic transmission combination. Rob Camp's C&S Performance of Plano, Texas, did the hard work and it began by disassembling the car completely. Years of accumulated damage meant that all exterior sheetmetal would have to be replaced in addition to the floorpans. While the body and structural work was being completed the rear wheelhouses were enlarged using Martz chassis sections. To eliminate the shock towers and provide advanced suspension geometry, a Martz front chassis and suspension kit was used. This created enough room to install the DOHC 32-valve engine. A complete rollcage ties the two sections together while the floorpan was modified to accept the larger Tremec T-6060 six-speed transmission.
Once all of the mechanical and structural work was completed, the paint aspect of the project began. The color was chosen to reflect the Ford corporate color but a metallic component was added. The Boss 429 hoodscoop and tailpanel were painted in Argent Silver. With the suspension adjusted for stance, and the wide rubber planting the car to the ground, the look is both modern and traditional at the same time.
The car carries the hoodscoop and front spoiler just as the original Boss did, but the side lettering has been subtly changed to reflect the correct engine displacement. In that aspect the car is true to the Boss 429 formula. It's the larger wheels and wide rubber that give this Boss tribute its modern flavor, and we'd have to say that Tim has the modern and traditional blend just right. Apparently, others agree with us. When the car was unveiled at the Mid America Ford and Shelby Meet in Tulsa, Oklahoma, it wowed the crowd and took top honors in both the Modified Mustang class as well as Best of Show. We salute Tim's awesome project as one of the finest Modified Mustangs that we have ever seen.
Tim Albers' '70 Mustang SportsRoof
- Ford Racing GT500 crate engine
- Whipple 3.4L supercharger
- Billet 160mm mono-blade throttle body
- 72-lb/hr injectors
- JLT carbon-fiber cold air kit
- AFCO intercooler
- Fuel Safe 20-gallon fuel cell
- Russell and Aeromotive fuel fittings and lines
- Painless Wiring
- Aeromotive return fuel system
Underhood is wall to wall motor and the 32-valve installation looks like a factory affair.
- '07 Ford Mustang Tremec T-6060 six-speed transmission
- '07 Ford Mustang GT500 dual disc clutch system
- Ford Racing GT500 shifter
- Chris Alston Fab-9 rear
- Moser 33-spline axles
- True Trac differential
- Custom 3-inch steel driveshaft
- 4:56 gears
- C&S custom stainless steel long-tube headers
- C&S custom 3-inch stainless steel exhaust
- Spin Tech custom stainless steel mufflers
- Front: Martz chassis and suspension kit, Martz coilover shocks
- Rear: Martz four-bar suspension, Martz coilover shocks
- C&S custom subframe connectors
- C&S custom six-point rollcage, removable side and rear bars
- Front: Wilwood Superlite 4, 13-inch disc, four-piston caliper
- Rear: Baer Racing 12-inch disc, single-piston caliper
With 750 horsepower underhood we're sure that the full 'cage gives passengers a secure fee
- Front: True Forged custom billet Magnum 500, 18x8
- Rear: True Forged custom billet Magnum 500, 18x12 1/2
- Front: Nitto NT-555, P265/35ZR18
- Rear: Nitto NT-555, P335/30ZR18
- Corbeau CR1 leather seats, C&S custom-built console covered by Dee's Trim Shop, JME gauge cluster, Auto Meter carbon-fiber gauges, Pioneer stereo system, '07 Mustang cruise control switches, DJ safety cam-lock four-point front harnesses, stock rear seatbelts, MSD shift light, Hurst line lock, Ididit tilt steering column, stock folding rear seats narrowed and rear trim panels modified
- C&S custom-blended Debeer Blue Metallic with Silver accents, stock BOSS 429 hoodscoop, front chin spoiler, PIAA driving lights, HID headlights, LED taillights, custom "BOSS 5.40" side graphics, C&S custom intercooler and radiator tanks, C&S custom billet trunk hinges, Ring Brothers billet hood hinges, Quick-Latch Products hoodpins, custom rear wheeltubs, C&S custom engine compartment panels and core support