Mustang MonthlyFeatured Vehicles
2003 Ford Mustang Cobra Powertrain - Crossbred
Blend An '03 Mach 1 With An '03 Cobra Powertrain, And The Result Is A Mach 1 That'll Seemingly Go Mach 2
The year 2003 was a banner year for Mustangs. Not only were regular V-6 and two-valve GT models helping carry the baton as the only "Pony" cars left standing after about 40 years, the Mach 1 and Cobra iterations were providing unprecedented excitement for a model that's now 10 years old. And the lineup looks set to repeat for 2004, with two new colors on deck for the Mach 1, along with a Mystichrome Cobra to pique even more interest.
You could safely say the current Mach 1 and Cobra (that is, both '03 and '04 models) might be the greatest Mustangs to date-certainly so on the late-model side of the ledger. And, if that's the case, what would happen if you combined the two? One possible outcome is Classic Design Concepts' "Machinator," built to showcase CDC's Mustang accessory line. The "Cobra-ized" Mach 1 is a true standout no matter how you look at it. Late-model-style Mach 1 cachet? Check. Eye-catching good looks with vintage-style Mach wheels and a full helping of CDC goodies? Check. And, finally, knuckle-dragging, supercharged Cobra horsepower? Check.
The first part-those things that make an '03 Mach 1 all the rage-you already know about. But we'll concentrate on the other two areas since they make this early production Mach 1 (the fifth one built) such a spectacular mix of Mach/Cobra cool.
First, the engine and transmission were needed to create the Machinator (short for "Mach 1" and "terminator," as often attributed to the supercharged Cobra). After CDC acquired a new Cobra drivetrain, the conversion began. Though not a one-day swap-in-and-start task, the transformation was feasible because both the new engine/transmission and receiver car were the same model year. Further, CDC had in stock plenty of supporting components because a division of the company (CDC Racing) is heavily involved with Mustang Racing Technologies and its Mach 1 Racer program.
It took some real involvement, however, as the Torch Red Mach was taken down to its bare shell to exchange the unibody's three main electrical harnesses for the Cobra-spec versions. A Cobra EEC V computer was also used, along with a dual-pump '03 Cobra fuel tank (we investigated this process in our Sept. '03 issue).
In keeping with the Mach 1's spirit as a straight-line screamer, the 3.55:1-geared 8.8-inch solid-axle rearend was retained in lieu of the IRS used in the Cobra. Between the Cobra engine and the Mach's 8.8 is the T56 six-speed that came with the new Cobra engine. A smaller F-150 Lightning supercharger pulley ups the boost and pushes output at the flywheel past the 500hp threshold.
So there's the Cobra part of the mix. Stirring in the CDC bits made the package complete so this Mach-1-on-steroids could look the part. First up was the custom Shaker setup that's part factory and part CDC; recall that CDC offers Shaker kits for '99-'04 Mustang GT and V-6 models and was instrumental in the Mach 1's Shaker scoop at the factory developmental stages. Also used on the engine were the Mach's valve (or is it cam?) covers along with a powdercoated blower-belt shield that shows the Mach 1 logo proudly on the front of the engine.
To set the car apart from its seemingly more pedestrian Mach 1 siblings, the wheels are a Wheel Vintiques take on a Mach 1 wheel-think of them as a large-diameter version of a vintage Magnum 500 wheel, and you'll get the idea. The front 17x8-inchers are home to 245/45ZR17 Goodyear Eagle F1 tires, and the big-boy 18x9.5s in back are shod with 275/40ZR18 Eagle F1s. The ride height is just right, thanks to an MRT spring and shock package.
Other CDC-sourced pieces include the side-exhaust system that uses a Bassani X-pipe, side scoops, sequential taillights, body-color side mirrors with built-in turn signals, round driving lights, a billet fuel door that has a remote electrical release, honeycomb-pattern Mach 1 rear-trim panels, and a red/white/blue grille pony. Also used is a V-6 rear fascia to eliminate the exhaust cutouts. The hood has been repainted to mimic the look used on '69 Mach 1s.
Inside, CDC added other trick stuff like a Cobra gauge cluster and the retro shifter that uses a Roush lever and a T-handle with the Mach 1 logo embossed on it. CDC Mach 1 floor mats complete the small custom touches inside. A Mach 1000 stereo, usually available only in regular GT models, was added to the Mach/Cobra hybrid. The stereo isn't an option on the Mach 1 or Cobra where a Mach 460 is standard. CDC is now offering the Mach 1000 setup (which we thoroughly detailed in our Nov. '02 issue) as a plug-in-and-play affair for any Mustang that's already equipped with a Mach 460 system.
So there you have it. The Mach 1 platform combined with a Cobra engine and transmission, CDC custom touches, and the thumpin' Mach 1000 sound system, all merged to make one of the slickest 4.6-powered late-models we've seen in recent times
Warp speed, anyone?