Eric English
July 19, 2012

Tim Ray tells us he had three goals in mind when he set out to build the '67 Fairlane you see featured on these pages. One, he wanted a "one-of-a-kind" street machine. Two, it had to be "truly immaculate," and three, he wanted it "just plain nasty." From the looks and sounds of things, Tim scored on all points. Some would describe this classic Ford intermediate as "old school," and in general that's a fair assessment. There's no doubt Tim went with a traditional recipe for cutting a large swath on the street scene, which mostly involves a "bigger is better" approach.

Tim bought his Fairlane from a police officer who was in the preliminary stages of turning the original 289 car into a Pro Street effort. The often heard story of changing interests benefitted Tim on this one, and he bought the car as a roller with a paltry amount of work completed. With plenty of help from friends John Martell and Mike Morales, Tim spent about four years on the transformation. Morales was the guy who worked magic with the body and paint, eventually laying down Dupont products in an '02 Honda Chianti Red. Does it look like a modern interpretation of Ford's period Vintage Burgundy? Yep, but it turns out that wasn't a factor in Tim's choice. He simply liked the color. The realization that it looked like a souped up factory hue came later, and with positive sentiment. More period vibes come from the silver rocker stripes and GTA emblems. No, the car isn't a real GTA, but the improved aesthetics are hard to beat.

Ever seen a '66-67 Fairlane with a 4-inch cowl hood? We hadn't either until now, and it's clearly an unusual choice, but remember one of Tim's mantras--one of a kind. Though this styling cue is mostly associated with Chevrolets, we give Tim props for creating the all-steel concoction all on his own. That it's functional by providing clearance and ventilation for the high-rising, 385-series big-block underneath, well, it's all the explanation that's necessary.

A large part of the "plain nasty" character Tim was striving for comes from the 429-based engine that truly shakes, rattles, and rolls. Weighing in at 521 cubes, courtesy of a 4.39 by 4.30-inch bore and stroke, the engine is big and mean by any standard. Tim built the engine himself using a 1970 block. He filled it with a rotating assembly made up of a Scat stroker crank, Scat H-beams, and SRP forged pistons. In conjunction with the Trick Flow aluminum cylinder heads, the result is a 13:1 compression ratio and an appetite for 114-octane race fuel. A custom Delta solid roller cam is correspondingly large, and the audio that comes through the pair of 3-inch Borla Racing bullet mufflers is something we wish we could better convey in print. Suffice it to say, it's sweet music, accompanied by the unmistakable scent that comes from a high-compression engine burning race fuel.

Photo Gallery

View Photo Gallery

Sticking nearly 800 horsepower to the ground would be a challenge with stock suspension and the limited confines of a Fairlane rear wheelhouse, so to better accomplish the task, Tim went big yet again. Starting with an Art Morrison back half frame kit, John Martell helped install the totally revised suspension, which now sports Art Morrison ladder bars and coilovers, and a beefy 9-inch rearend with a Detroit locker, 35-spline Dutchman axles, and a 4.11 gearset. Widened inner wheelhouses made room for sizable 29x14.50 Hoosier Quick Time Pros, but nevertheless, our photos reveal it's still easy for Tim to overcome the big bite--big surprise!

Despite the racy engine and suspension, Tim wasn't out to build a pure quarter-miler--after all, that's not what street machines are all about. While the car is admittedly devoid of creature comforts such as tunes and air conditioning, a peek inside reveals a nicely finished cockpit from where Tim is well set to command and control. Features include Procar buckets, Auto Meter gauges, a LeCarra steering wheel, and a Hurst Quarter Stick. Exterior colors are used nicely on the dash and six-point rollbar, and the GT theme continues with Dearborn-Classics-sourced door panels. Tim says there is no sound system because you'd never hear it. Indeed!

We asked Tim if he'd had a chance to run the car at the local track, but the answer was negative as of press time. Too bad, because we'd really love to know what this larger-than-life Fairlane could do when pressed to the limit. Would the results tell us if bigger is better? That's hard to say, but we'll tell you this much--don't argue with the sentiment.

Weighing in at 521 cubes, courtesy of a 4.39 by 4.30-inch bore and stroke, the engine is big and mean by any standard

John Martell helped install the totally revised suspension, which now sports Art Morrison ladder bars and coilovers, and mounts a beefy 9-inch rearend with a Detroit locker, 35-spline Dutchman axles, and a 4.11 gearset

Photo Gallery

View Photo Gallery

The Details

Tim Ray's 1967 Fairlane

Engine

  • 521 cubic inches
  • '70 429 block
  • 4.39-inch bore
  • 4.30-inch stroke
  • Scat stroker crank
  • Scat H-beam connecting rods
  • SRP forged aluminum pistons
  • Trick Flow aluminum heads ported by Scott Johnston
  • Edelbrock Victor intake, ported
  • 1,050-cfm Dominator carburetor
  • Delta Cams custom grind, 266/272 degrees duration at 0.050, 0.680/0.700-inch lift
  • MSD distributor and Digital 6 ignition

Exhaust

  • Custom 1-7/8-inch long-tube headers by Jim Caughlin
  • 3-inch exhaust with Borla bullet mufflers

Transmission

  • Powerglide with transbrake by Gary Ericson (Vancouver, WA)
  • Art Carr 10-inch converter
  • Hurst Quarter Stick shifter

Rearend

  • 9-inch w/Detroit Locker
  • Dutchman 35-spline axles
  • 4.11 gears

Suspension

  • Front: Rod and Custom Mustang-II-style with rack-and-pinion
  • Rear: Art Morrison four-link with ladder bars and coilovers

Brakes

  • Front: Rod and Custom/Ford disc
  • Rear: Wilwood disc

Wheels

  • Front: Weld Racing Draglite, 15x7
  • Rear: Weld Racing Draglite, 15x12

Tires

  • Front: BFGoodrich P225/60R15
  • Rear: Hoosier Quick Time Pro LT29x14.50-15

Interior

  • Scat Procar bucket seats, Dearborn Classics door panels, LeCarra steering wheel, Auto Meter gauges, Morrison six-point rollbar

Exterior

  • Dupont acrylic urethane in Honda Chianti Red by Mike Morales, owner-fabricated steel 4-inch cowl induction-style hood, Phoenix Graphix GT stripes, Crites fiberglass bumpers