5.0 Mustang & Super Fords
1988 Fox Coupe 5.0 GT - Back On Track - Strip/Show Fox
Jim Ricchezza Is Back On The Scene With This LX Notch
Horse Sense: Jim's former GT was a regular car-show winner, and this new coupe is a true threat on both the car-show field and the dragstrip. He's won an Open Comp class race at a Buick versus Ford race at Atco, as well as Best Race Car and Best Engine awards at the NMRA Atco race.
The Mustang scene is diverse, and enthusiasts' wants and needs are cyclical. For instance, a person will build a show car only to get tired of constantly cleaning it. That same person will undoubtedly buy a race car so he or she can actually have some fun for once. Inevitably, the same goes for the other side of that coin. Many racers get tired of working their knuckles to the bone, and just want to sit around and drink cold beverages while at the track. However, they still want to be a part of the action, and a show car is their answer.
Fortunately, the Mustang lifestyle presents opportunity for both the show-car builder and the racer, no matter the venue. Especially lately, we've heard of people enjoying both sides of the fence and having both a show car and a race car. One person that has both a race car and show car in one Mustang is Cherry Hill, New Jersey's Jim Ricchezza. He deemed his former '88 GT ("Flame On," Aug. '06, p. 110) too nice to drag race, so he decided to build a car that would serve both duties in one package.
With the sale of the GT, he turned his attention to this coupe, which he bought off the Corral (www.corral.net). The car was silver with a primer hood, and Jim raced it in a 12.0 index class at Atco Raceway in Jersey. After a season in the 12.0 class, he wanted to go faster, but with his painting background, you know he wanted the car to look good doing it.
Out came the engine for freshening and increased horsepower. However, with the engine yanked, it was also a good time for Jim and his dad, also named Jim, to weld, fill, and smooth the engine bay. These guys couldn't leave all those holes in the engine bay and still sleep at night. While the engine bay was attended to, the 8.8 was removed from the car and sent to Rhodes Custom Auto to be checked for straightness, and to have the tubes welded and braces added for extra rigidity. When Rhodes was finished with the 8.8, it came back to Precision Paintworks in Cinnaminson, New Jersey, the family business, where Jim painted it using PPG Products paint. Then Jim's Uncle Ernie installed a Moser spool and 33-spline axles, and 4.88 gears.
To go along with the 8.8 going back under the car, Ernie also hid the brake lines, installed Aerospace Components disc brakes at each corner, and bolted in a UPR Products tubular K-member kit. Up next, Ernie assembled the 306 while Grove Auto's Jim Dunn stripped the car's wiring harness, installing a Painless Performance wiring harness in its place.
While all this was going on, every panel on the car, including the quarter-panels, were replaced. Evidently the car was rough, with pounds of body filler hiding under the seemingly innocent silver paint. Every panel except for the roof was replaced with either new or used straight panels to arrive at a smooth exterior. "With the body work done," Jim says, "My father and I custom-mixed the Tangerine color." Jim applied three coats of the Tangerine, followed by four coats of PPG clear. During the car's reassembly, the guys noticed the need to repair the quarter-window moldings. Since Jim had been down this road before he used more PPG products to make them good as new.
Since the exterior came out so well, and who would expect anything different from these guys, the interior also had to be brought up to "code." A stock interior just wouldn't do. Corbeau seats highlight the interior redo, but fresh black panels and carpet were also installed. One of Jim's trademark additions, good friend Bill Kirk hand-fabricated the custom center console before Tom Meers added the airbrushed graphics. Then Jim followed up with four coats of clear. "We have a one-of-a-kind console that looks phenomenal," Jim says.
1988 Fox Coupe
5.0 Tech Specs
Engine And Drivetrain
Block '72 302, 0.030-inch over
Rotating Assembly Eagle crankshaft and connecting rods, TRW pistons, Total Seal gapless piston rings
Compression Ratio 10.5:1
Camshaft Comp Cams solid flat-tappet cam and lifters
Heads Edelbrock Performer RPM, 2.02/1.60 valves, Trick Flow 1.6-ratio roller rockers, Comp Cams valvesprings
Intake Edelbrock Victor Jr., port-matched
Carburetor Biggs Stage 5 750-cfm
Power Adder Zip, zero, nada
Fuel System MagnaFuel QuickStar 275 fuel pump, Russell Performance braided fuel lines, Holley fuel-pressure regulator
Exhaust MAC 1¾-inch long-tube headers, Dr. Gas cross-pipe exhaust system, DynoMax Bullet mufflers
Transmission Frank Lupo Pro-Formance Transmissions C4, Ultimate Converter Concepts 5,000-rpm stall converter, and transbrake with a B&M shifter and a Ford Racing Performance Parts aluminum driveshaft
Rearend 8.8, welded and braced by Rhodes Custom Auto, 4.88 gears, Moser Engineering 33-spline C-Clip eliminator axles
Ignition MSD 6AL with two-step and Blaster coil, Taylor Vertex Pro 409 spark plug wires, Autolite spark plugs
Gauges Auto Meter
Chassis And Suspension
K-member UPR Products tubular
Control arms UPR Products tubular
Caster/Camber Plates Maximum Motorsports
Springs/Struts QA1 coilover
Brakes Aerospace Components Drag Race
Wheels Billet Specialties, 15x3¾-inch
Tires Mickey Thompson Sports-man
Springs Eibach Drag Launch
Shocks Strange Engineering adjustable
Control arms UPR Products adjustable uppers and lowers, spherical bushings
Traction Devices Maximum Motorsports anti-roll bar
Brakes Aerospace Components Drag Race
Wheels Billet Specialties 15x10, 6½-inch backspacing
Tires Mickey Thompson E/T Drag, 28x10½-inch
Chassis Stiffening S&W eight-point rollcage and Kenny Brown Performance subframe connectors