5.0 Mustang & Super FordsFeatured Vehicles
Chicane's '87 GT Fox Rod: A New Level of Excellence
Perfectionist Joe Gosinski built a 5.0 for himself and gave the world a new standard for 5.0 Mustangs. Let the Fox restomod era begin.
Joe sequestered his Mustang in an upstairs room for most of its six-and-a-half-year build. He showedit to us for the first time almost three years ago in a project car'stypical disembodied state, and even then it was a presence we knew wehad to share.
Joe Gosinski flits around his shop in nervous bursts. When the cellphone rings, he unloads into it in rapid fire and keeps right onwrenching because two things at once are almost enough. There's so muchto do, and nothing ever fits or runs right the first time.
Practical enough to survive running his own shop, yet gifted with anivory-tower vision of automotive excellence, Joe's medium frame andsnappy energy belie his 38 years. A tinkerer and youthful disassemblerof anything that ticked, Joe was a natural for cars, and after an Ohiochildhood and military stint he settled in Southern California andstarted his Mustang journey as a technician at Saleen Autosport in 1989.Those familiar with Saleen will take one look at the shimmering blackhatchback in the photos and smile knowingly when we say Joe's first jobwas applying the gray and yellow stripes on those rare SSCs. And neverone to hide an influence or take an undo credit, Joe is quick toacknowledge those early Saleens left a lasting impression. As he put it,"I really liked the SSC, even if it was only 270 hp; it was just reallyclean."
In fact, like several other heavy hitters in the Mustang world, Joe owesmore than just a start in the Pony hobby to Steve Saleen. Joe wasinvolved in many aspects of building Saleens--from Mustang bodywork todeveloping 302 and 351 engines, working on the XP8 Explorer, andbuilding all the SA10 anniversary cars--and was there long enough tohear of the S7.
Leaving Saleen in 2000, Joe opened his own shop, Chicane Sport Tuning,in nearby Torrance, California. He had built Mustangs for a handful ofcustomers after hours in a home garage, but after 11 years of Saleenassembly line wages while picking up talents such as Auto CAD in hisspare time, he opted to make a fulltime go of it. And with his extensiveSaleen background and his burning attention to detail, upgradingMustangs--especially Saleen Mustangs--was a natural. Starting with wordof mouth and help from Joe's who's who list of SoCal Mustang-scenefriends, Chicane Sport Tuning became the one-stop Saleen finishingschool for anyone south of San Francisco. It quickly had a reputationfor sharp presentation with the trendy late-model street set andhot-rodded early cars, too.
The black hatch seen here came to Joe in 1998 as a side job before heleft Saleen. In those days it was an '87 GT automatic, silver over bluewith manual windows and mirrors. The owner wanted a Vortech-assisted 306Joe had developed at Saleen's.
"So we started," Joe explains, "and he spent money hand over fist."While the engine was out, he wanted a transmission. And a tricked-uprear axle. Then custom appearance and handling items. "And after a yearhe came to me and said, 'Man, you know, I can't go any further. I'mgoing bankrupt, I've been taking money out of my retirement account andspending money from credit cards that I shouldn't have; I just can't goon--but I owe you for the labor and parts, so let me give you thecar...' So I took it and I started my own path on it. I got rid of the306, [added] the six-speed, did the brakes several times, and now, 61/2years later, there it is!"
We don't have the space to recount all the iterations the car wentthrough in Joe's back room. But from the beginning, he simply wanted acar for himself--a nice driver that would do well in some car shows, runhard, but above all, simply please Joe's tastes as he piled up therun-around miles. But as he went on, his restless ambition to make anice car conspired with the ever-evolving Mustang market. Joe's exposureto such talents as Chip Foose of Overhaulin' fame ensured his Foxescalated from then state-of-the-art bolt-ons to its current status as aleader in custom-built handiwork.
Upon the car's debut at the 2005 Saleen Open House car show (whereelse?), even casual observers stopped to admire the hatchback'scome-hither gleam. They knew the paint looked good, but couldn't haveknown Joe spent 12 large and had the car painted three times by threedifferent shops before the black pigment took on that 3-D, pool-likedepth over straight body panels. Credit Al Martinez for the final work.
Likewise, the all-polished engine is an obvious attraction, but it takesa second to realize that, while it's clearly a 5.0 H.O., something is upwith this one. The missing distributor and coil-on-plug ignition, alongwith the seamlessly faired oil fill riser, are typically what get theviewers to come to a dead stop and start soaking up the details.
Enginewise, those details are a 347 long-block built by Dan Nowak. It'sall forged inside, with a mild cam, and Joe claims nothingearth-shattering about the studded and girdled internals. The Trick Flowheads are fed by an S-Trim Vortech V-1 blowing 10 pounds of boost. Atpress time the combination had been dyno tuned for driveability, but notmax power. All-out thrust never was the point, anyway. Joe's had legionsof mega-powered, way-tuned-up S-351 Saleens under his throttle foot andknew he didn't need the insane power, single-digit fuel mileage,cantankerous driveability, and short engine life of such cars. He'sexpecting high-400 hp at the tires, and that's plenty. So far, tuning bySteve Ridout at Powertrain Dynamics has shown 288 rwhp and 412 lb-ft oftorque at 3,600 rpm, and the highest engine speed was reached whiledialing in the engine management using just 8 pounds of boost.
The coil-on-plug ignition was Joe's idea to clean up the enginecompartment and add interest, but he says it never would have happenedwithout Dave Midinski and Michael Cullen, both fellow Saleen ex-pats.Dave is the gifted general electronics guru who was the hands-on talent,while Michael's long Ford service background provided the importantspecialized knowledge of Ford ignitions. The COP ignition is builtmainly from modular-engine bits, but clearly required some one-offfabrication.
You can also appreciate Dave's skills in getting the '99 EEC V processorto work with a return-style fuel system in Joe's car.
Mechanical complexity is found in the all-custom cog-belt blower driveJoe developed with generous help from Auto Specialties. Why a cog? Justfor its visual and aural delights. Surprisingly, the real issue wasfinding a belt short enough for the simple system; it was finallylocated at the New England Belt Company. No intercooler is used, as Joebelieves the cost and complexity aren't worth it for a 10-pound streetsystem, and it would be another major bit of plumbing for him to dressand package.
Plumbing that did get the treatment was the blower inlet tubing. It wasbuilt by Shane Boulay, a fabricator also associated with the Overhaulin'TV show, using three 90-degree bends of 31/2-inch stainless steel tubingthat were cut and welded using no filler rod. It also accepts Joe'scarefully hand-fabbed bypass air system, which is purposefully aimed toflow into the supercharger.
As for the oil-fill riser, it is one of many touches custom-machined byRoy Price, "an awesome, awesome guy." The filler neck is milled frombillet and faired into an otherwise stock valve cover. There are maybesix others in the world. Other Price points are a billet-aluminum alarmhorn (not yet on the car), billet wheel chocks for car-show duty, boltcaps on the front of the engine and steering rack, and the core-plugcover on the leading edge of the '93 Cobra intake manifold.
Of course, the aluminum polishing is all custom work. Joe evendisassembled the car's original A/C compressor and alternator so theirhousings could be polished or powdercoated rather than buy off-the-shelfbeauty units. The polished stainless steel lines were bent byJoe--they're easiest to spot connecting to the fuel rails--and theoverflow bottle on the shock tower is a CSR unit modified to accept astainless steel downtube so it won't make a mess should it ever vent.Joe also welded in 90-degree stainless fittings and connected them withvinyl tubing to give the bottle a level gauge.
Vinyl-shrink hose "clamps," which are easy to overlook at first,definitely streamline the engine compartment. These Power Grip clampsare essentially giant heat-shrink tubes sold by Gates Rubber. Joe saysthey hold like crazy, but you have to work some to remove them.
Cooling duties are handled by the first double-pass,double-fan-and-shroud radiator assembly Joe ever built. Nothing lessthan a reengineered cooling system, these radiators have been fastsellers for Chicane Sport Tuning. This car does mark the longanticipated debut of Chicane's radiator cover plate--that's thefinishing bit with the "Chicane" advertising on it.
Another Chicane touch is the Fox Box, the all-metal bulkhead fitting inthe right inner fender for engine inlet air. It gives the 90mm Lightningmass air meter a useful mounting angle that's a big help in smoothlyrouting air to a blower or throttle body in naturally aspiratedapplications.
Joe found Hooker headers fit and are made well, and he bought Hooker's15/8-inch equal-length, ceramic-coated short-tube headers for this carearly on. The rest of the all-stainless, all mandrel-bent exhaust systemis Bassani, terminating in simple dump tubes. Joe will haveover-the-axle tailpipes fabbed to match by Bassani once the initialfuror dies down. No matter what, though, Joe won't let the tailpipes bevisible because they clutter the lines.
Custom work around the Chicane-built transmission crossmember wasrequired by the time Joe fit the D&D-sourced T56 transmission. It'ssupported by a McLeod flywheel, a Centerforce clutch, and an old-styleSaleen short-throw shifter. Joe says he found the aluminum driveshaft inhis shop's parts pile, and the rear axle is standard hot-rod 8.8-inchfare: 31-spline axles, Auburn locker, and 3.73 gears.
Early on, Joe fitted an all-Global West suspension and stiffeners, butyears before driving on it, he changed his mind, removed much of thesuspension, and went almost purely Maximum Motorsports. So now the carwears Global West subframe connectors and Delalum bushings. The Maximumgear includes the company's coilovers, torque arm, Panhard bar, and somecontrol arms. The K-member remains stock, and the bumpsteer kit isanother Roy Price custom piece.
Likewise, Joe first fitted Ford Racing Performance Parts' M-2300K kit,but later sold the front calipers and went with yellow Saleen/Alconsclampers and discs. He chromed the bolts, then decided to paint the rearcalipers yellow. Then a customer walked in with Wilwood brakes and Joeconsidered them, but ultimately decided pad knock-back would be an issuewith the race-oriented calipers. Finally, he selected a Mercedes reardisc with integrated drum parking brakes in the disc hubs. Six yearslater, that left the master cylinder, proportioning valve, and rearcalipers from the original FRPP kit when he first drove the car.
A 21-gallon Fuel Safe fuel cell and a 255-lph Walbro GS340 high-pressurepump anchor the fuel system. The cell/pump combination requiredextending the fuel-pump mount to reach the bottom of the cell. The linesto the engine compartment are stock, and they feed into Goodrichplumbing.
Inside, Joe's 5.0 continues its understated avant-garde 5.0 theme. Joepretty much had an interior going, but six weeks before debuting the carhe turned it over to Melanie and Stacie Morimoto of Motostyle. These twosisters have a long history of excellent custom interior design andexecution with Saleen, Overhaulin', and others, so Joe turned them loosewith the two-seat theme, a pair of old Recaros he had on hand, andorders to incorporate just a blaze of yellow in the otherwise grayinterior. Using luxury-car materials, a nine-piece custom carpet kit wassewed into a perfect, wrinkle-free fit. Above, suede forms the headlinerand sunvisors.
The rear shelf/seat delete again owes its inspiration to the Saleen SSCtreatment. To get started, Joe gave Motostyle an original Saleen SSCpackage tray bought at one of Saleen's annual sidewalk sales. He alsotossed in a Dugan Racing center-cap section, but in the end it was cutdown until only 6 inches of it remained, with the rest rendered incustom fiberglass until the fit was perfect. There's plenty of storagein these floor-mounted package trays--the fire extinguisher that Joe"didn't want cluttering up the car" lives there, along with the usualwax, rags, and such.
It's a great interior, one that gets better upon close inspection. Thefew exposed screws, for example, were custom colored to match theinterior.
For that matter, the entire car bears minute inspection. And for theprice, we suppose it should. "I have damn near $90,000 in it, if youcount several hundred of my hours at $70 an hour," a semi-stunned Joedivulged in a fleeting reflective moment. "But even without the labor, Iknow I have almost $62,000 in parts in it, and a lot of those werecost-plus-10 from Santa Margarita Ford." As a private effort, with nosponsorship, you now have a better idea why it took Joe over six yearsto put together his ultimate 5.0.
Ultimate 5.0. That's a good description for a Fox Mustang that redefinesthe breed. But while taking the 5.0 to new heights--in its spareelegance, cutting-edge technicalities, and retention of the core 5.0attributes of pushrod power and purposeful simplicity--Joe's hatchbackis still inarguably all-5.0. But it was done in the modern way, andready for the rest of us to follow.
5.0 TECH SPECS
ENGINE AND DRIVETRAIN
Block: '74 D4 302 block
Displacement: 347 ci
Cylinder Heads: Trick Flow
Intake Manifold: '93 Mustang Cobra
Throttle Body: '90 F-150 Lightning
Power Adder: Vortech V-1, S-Trim
Exhaust Hooker: short-tubes, Bassani after-cat
Fuel System: Fuel Safe cell, Goodrich hoses, 47-lb/hr Powertrain, Dynamics injectors, Vortech fuel rails
Transmission: D&D Performance T56
Rearend: 8.8-inch, 3.73 gears, Auburn limited slip, 31-spline axles
Engine Management: '99 EEC V w/custom programming
Gauges: Auto Meter
SUSPENSION AND CHASSIS
Springs: Maximum Motorsports coilover
Struts: Maximum Motorsports/Bilstein
Wheels: Ferrari 360 Modena, 18x7-in
Brakes: Saleen/Alcon calipers, 13-in rotors
Springs: Maximum Motorsports coilover
Shocks: Maximum Motorsports/Bilstein
Control Arms: Maximum Motorsports
Wheels: Ferrari 360 Modena, 18x10-in.
Brakes: Ford 2300K rotors, Mercedes calipers
Chassis Stiffening: Global West subframe connectors, Maximum Motorsports bracing, Alston Group rollbar