Muscle Mustangs & Fast FordsFeatured Vehicles
Snap Shots - Readers' Rides - September 2014
Sponsored By National Parts Depot
Stanced StangDaniel Mairella • Bloomfield, NJ • '08 Mustang GT
Dan is no stranger to Mustangs with this '08 GT being his third Pony. This baby rumbles with the help of SLP long-tube headers and X-style midpipe, Borla cat-back exhaust, and FRPP cams. Other mods include a Steeda intake, Motive 3.90 gears, Hurst shifter, tune, GT500 carbon-fiber rear disc brakes, Classic Design Concepts chin spoiler, Raxiom fogs, Moroso oil catch can, and 18x10 Rota Grid wheels. That sinister stance is provided by KW Variant 3 coilovers with ground control camber plates, strut bar, and Energy Suspension polyurethane bushings. Future plans involve a supercharger, or to make power through a naturally aspirated 302 stroker.
Mod BugCurtis Sowell • Arlington, TX • '04 Mustang GT
After Curt's father died leaving behind inheritance money, he was on the lookout for his fourth Mustang. His wife, Leann, found this '04 Mustang GT for $10,000 with 80,000 on the clock. Soon after purchase, the mod bug bit and his new Mustang had FR500 Anthracite wheels, HPR lowering springs, JBM caster/camber plates, cold-air intake, SCT programmer, and a rumbly Bassani exhaust setup. Even after the aforementioned mods, Curt and Leann are far from finished.
Family RivalryCharles Walker • Fort Meade, MD • '12 Mustang GT
Charles is the black sheep of a GM-lovin' family with his '12 Mustang GT. After testing both the new Camaro and Mustang, He picked up this new GT and then added a Boss intake manifold, AIRAID Parnelli Jones–edition intake, JBA long-tube headers with off-road X with cutouts, and Roush axle-back complete with Boss side exhaust. Other go-fast goodies include 3.31 gears, a Barton short-shifter with two-post shift bracket all tuned together by AED Performance. Suspension upgrades come from Eibach Pro Springs, a J&M Panhard bar and lower control arms, BMR upper control arms, and Whiteline LCA relocation brackets. Cosmetically, the Mustang has a Saleen Powerflow hood and Saleen grille, GT500 spoiler and rear valance, Boss front valance with splitter, Trufiber carbon-fiber decklid, Roush side splitters, carbon-fiber wrapped roof, and 20-inch Nurburgring wheels.
Naughty NotchDavid Hilner • Rochester, NY • '90 Notch
David's '90 Notch started life as a four-banger, but it didn't take long for him to convert his pride and joy into a mean 5.0L. His 310ci engine now has an MSD 6AL Digital Plus ignition system, ProSystems 850cfm carburetor, and Victor Jr. intake. All of those horses are tucked under a Harwood 4-inch cowl hood. David's future plans include a full UPR chrome-moly suspension with coilovers, Aeromotive A1000 fuel system with fuel cell, AFR 185 Renegade heads, 10-point rollcage, and new rear end with Strange 35-spline axles and full spool. David hopes to start running NMRA and local events in upstate New York. Good luck, David!
Want your ride featured? Send photos with complete information to Muscle Mustangs & Fast Fords Snap Shots, 1733 Alton Parkway #100, Irvine, CA 92606, or email email@example.com.